
PROGRAMMING
A button with a red and green light next to it is required for the DXD features.
To program a CF/DXD button on a voice terminal:
1 Label the button CF/DXD.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you’re programming and that you
can’t place or receive calls.
3
Touch the button you want to program.
4 Dial *83.
5 Slide the T/P switch to the center position.
T P
T P
CF/DXD
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
83
Using the CF/DXD Button
Touching the CF/DXD button repeatedly cycles the system through DXD, CF,
and normal modes. The red and green lights next to the CF/DXD button will
help you recognize which mode the system is in.
HOW TO USE
5-62 MERLIN Plus System Features
Green and red light off = Normal mode
Only green light on = DXD mode
Only red light on = CF mode
Kommentare zu diesen Handbüchern