AT&T Synapse SB67070 SIP Installationsanleitung

AT&T Synapse® SB67070 SIP Gateway Configuration Guide Software Version 3.1.2 & later 3.x.x versions For Use with AT&T IP Flexible Re

To configure SIP Account Settings: 1. In the navigation menu at left, click SIP Account Settings. The SIP Account Settings page appears. 2. Sele

b. Enter the Account Name. The SIP account name appears on the Dial Plan Settings page and the Trunk Reservation page. c. For Max Calls, enter the

b. Arrange the enabled audio codecs. Select a codec, then click  or  to change the order. AT&T IP Flexible Reach requires G.729 to be the pri

 move a trunk up or down the priority list by selecting it, then clicking  or . 3. Set the Call Log/Messages Prefix according to your Dialing R

5 Troubleshooting Note: For customer service, repair, replacement, or warranty service, and all questions about this product, visit our web site at

5.2 General Troubleshooting Topics SIP Gateway REG LED is RED or SIP Registration status on the WebUI is Unknown. Cause Action Incorrect SIP accou

Page 16 of 16 Calls on the SIP Gateway terminate unexpectedly. Cause Action Issues with SIP account settings. Make sure that your SIP account

TABLE OF CONTENTS 1 Introduction ... 3 2 Specia

1 Introduction This configuration guide provides instructions for configuring the Synapse Business Phone System for AT&T IP Flexible Reach SIP

 For the Network-Based Locate Me feature (aka Sequential Ringing), the Answer Confirmation option must be set to OFF. Sequential Ringing does not

3.1 SB67070 SIP Gateway Features  A LAN 10/100 BaseT Ethernet port connects to the existing Synapse network.  A four-line LCD display with four

3.3 Call Flow Inbound Call Flow: 1. A PSTN phone originates a call to an AT&T IP Flexible Reach service number. 2. The PSTN routes the call t

4 Configuration Guide This section describes how to configure the SIP Gateway Account Settings to support AT&T’s IP Flexible Reach Service. 4.1

4.2 Configuring Synapse for IP Flexible Reach Service The Synapse WebUI allows you to configure the SIP Gateway for IP Flexible Reach Service. 4.2.

4.3 Configuring the SIP Gateway To configure the SIP Gateway General Settings: 1. In the navigation menu at left, click SIP Settings and then cl