AT&T 2255 Bedienungsanleitung

2.4 GHz Dual Handset CordlessTelephone Answering System 2255with Caller ID/Call WaitingPlease also readPart 1 — Important Product InformationUSER’S MA

Key LockWhen this feature is on,the keypad cannot be used to dial calls. You canstill answer calls,but when the call is ended,the keypad lock is react

Language SettingYou can set each handset so the display appears in English or Spanish. Thedefault setting is ENGLISH.1 Press S.2 Press < until the

Set Dial ModeNOTE: When you change the dial mode setting, BOTH handsets areaffected.This phone comes set for touch tone (DTMF) dialing. If you have d

11TELEPHONE OPERATIONMaking a Call1 Press P,thendial the number— OR —Dial the number,then press P.2 Press P againto end the call.Answering a Call1 Pre

12Temporary Tone DialingIf you have dial pulse (rotary) service,you can change from dial pulse totouch tone dialing during a call.1 Make the call,and

Conference Calling1 If one handset is already on a call,you can connect the secondhandset to the call by pressing P.2 Disconnect either or both hands

This telephone can store up to 20 telephone numbers and names. Storinga number and name in one handset automatically stores it in both.Storing a Numbe

Dialing a Number in Phone Book1 Press m.2 Enter the first letter of the stored name,then scroll using < or >— OR —Press < or > to scroll t

16NOTE: Caller ID information is stored in both handsets. Removing acall record from one handset also removes it from the other.Reviewing Call Histor

Storing a Call Record in Phone BookYou can store a number received by Caller ID in the telephone phone book.1 Press S twice. The screen displays the m

CONTENTSBEFORE YOU BEGIN...1About the Base and the Charger..1About Caller Identification (Caller ID)...1A

18ANSWERING SYSTEM OPERATIONAT THE BASEAudible IndicatorsThis system gives you voice prompts for feature operations and voiceconfirmations when you pr

19Record Your AnnouncementNOTE: If you have assigned different mailboxes to different people, besure to tell callers in your announcement to press *1

Answering System Feature SetupYou can set up one feature at a time,or you can set up a feature and thenmove on to set up another feature.1 Make sure t

Listen To, Save & Delete MessagesThe system automatically saves your messages until you delete them,andcan store approximately 15 minutes of messa

Call Screening/Intercept1 Make sure the answering system is on,and set the message playbackvolume control above level 1 so you can hear the caller’s m

Connect with the Answering SystemYou can access many features of this system remotely from a touch tonephone.1 Dial your telephone number.2 When the s

Remote Access Commands (continued)Function Command:Record memo Press * 8;then mailbox number whereyou want memo recorded;speak afterbeep;press # 5 to

Battery LifeBattery life depends on how far the handset is from the base,and otherenvironmental conditions.NOTE: For optimum performance, charge your

Replace the Handset Battery Pack1 Install the handset battery.Use only AT&T Battery 2422,SKU# 23402.2 Charge the handset battery.• Place the hands

If you have difficulty operating this phone,try the suggestions below.For Customer Service,visit our website at www.telephones.att.com or call 1 800 2

About the Base and the ChargerThis cordless product provides you with two cordless handsets,a basestation and a spare charger. You can charge either h

If you hear noise or interference when using the phone:• You may be out of range. Move closer to the base.• Household appliances plugged into the same

If the caller’s name or phone number is not displayed during Call Waiting:• You should call your service provider to confirm that you subscribe toa co

If the system does not respond to commands from a remote touch tone phone:• Make sure you are calling from a touch tone phone. When you dial anumber,y

© 2001 Advanced American Telephones. All rights reserved.Printed in China. Issue 1AT&T 07/01

2 Connect the power cord. The ANSWER ON/OFF light goes on,and CL flashes in the MessageWindow.Use only the power cord supplied with this product.If y

INSTALLATION34 Charge the handset battery.• Place the handset in the base (or the spare charger).• Charge the battery at least 12 hours. After the fir

Wall Installation1 Press the tabs as indicated(figure a).2 Flip the base extension open (figure b).3 Run the line cord and the powercord through the o

FEATURE SETUP5Feature Setup MenuNOTE: When you follow the directions to “Clear Message Waiting”or “Set Dial Mode”you change settings for both handsets

Ring VolumeAdjust the volume of the handset ringer. Setting volume to 0 turns theringer off. Default setting is 3.1 Press S.2 Press < until the scr

Auto AnswerWhen this feature is on,an incoming call is connected when you lift thehandset from the base or the charger (you don’t have to press P). If