AT&T Synapse SB67070 SIP Bedienungsanleitung PDF herunterladen (Seite 5)

Figure 1 shows the configuration used during lab testing.

The above setup only shows main lab network elements.

This configuration guide provides instructions for configuring the Synapse Business Phone System for Fidelity

SkyTalk. Specifically, this guide describes how to configure the Synapse SB67070 SIP Gateway for a Fidelity SkyTalk

account.

Documents related to this configuration guide include:

Synapse Installation Guide software version 3.0 or later

Synapse Administrator’s Guide software version 3.0 or later

You can view and download these documents from http://smbtelephones.att.com/product-support/product-

documentation/manuals.

This configuration guide assumes that the Synapse system is installed and that users are able to make internal

(Deskset to Deskset) calls. A Synapse System must include one or more of the following devices:

Desksets (SB67025, SB67030 and/or SB67035 Desksets). The system supports up to 100 Desksets.

Gateways. At least one Gateway must be installed. The system supports up to four SB67010 PSTN Gateways,

one SB67060 T1 Gateway, and one SB67070 SIP Gateway. You can install any combination of Gateway models

in a system, as long as you do not exceed the supported number of each Gateway model.

For more information, see Figure 2: Sample Synapse System.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

AT&T Synapse SB67070 SIP Bedienungsanleitung Seite 5