AT&T Definity Callmaster II Bedienungsanleitung PDF herunterladen (Seite 32)

Note: If the programmed number is associated with a

list, it can be up to 24 digits. If the stored number is

NOT associated with a list (that is, an Automatic

Dialing button), it can be up to 16 digits. See your

system manager if you need help.

6 Press [confirmation tone], then [dial tone]

• The number is stored

7 Repeat Steps 4 through 6 to program additional

buttons

8 Hang up or press to end programming

To place an AD call

1 Select an available call appearance button

2 Press the selected Abbreviated Dialing button

[ringback tone]

• The call is dialed (silently)

Release

To program/reprogram an

outside number,

extension, or feature code

into a Personal List

1 On a separate sheet of paper, write down the outside

numbers, extensions, and/or feature codes you want

to program as items on your Personal List(s)

Note: Each phone number or feature code is stored

as a separate item.

2 Press a call appearance button [dial tone]

3 Press

or Dial the Program access code ________ [dial tone]

4 Dial the Personal List number (1, 2, or 3)

[dial tone]

5 Dial the list item (1, 2, 3...)

6 Dial the number you want to program (up to 24 digits)

Note: If you are programming an outside number,

be sure to include a trunk code, if applicable.

7 Press [confirmation tone], then [dial tone]

• The number is stored

• Repeat Steps 5 through 7 if you want to program

additional items on the same list; press

and begin again at Step 1 if you want to program

items on another list.

Program

Drop

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Keine Kommentare

AT&T Definity Callmaster II Bedienungsanleitung Seite 32